Description
The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular core. After an Aluminum Polyethylene Laminate (APL) moisture barrier is applied around the cable core, the cable is completed with a PE sheath.
Application:
1.Long-distance telecom, LAN in high-voltage area or access to telecom network
2.Especially for power transmission system. excessive thunder areas and high electromagnetic interference.
3.Recommended layings methods
4.High-voltage area, Aerial
Application:
1.Long-distance telecom, LAN in high-voltage area or access to telecom network
2.Especially for power transmission system. excessive thunder areas and high electromagnetic interference.
3.Recommended layings methods
4.High-voltage area, Aerial
Technical data
| Cable Type | Fiber Count | Tubes | Fillers | Cable Diameter
mm |
Weight kg/km | Tensile Strength
Long/Short Term N |
Crush Resistance
Long/Short Term N/100mm |
Bending Radius
Static mm |
| GYFTA-2~6 | 2~6 | 1 | 5 | 11.0 | 100 | 600/1500 | 300/1000 | 10D/20D |
| GYFTA-8~12 | 8~12 | 2 | 4 | 11.0 | 100 | 600/1500 | 300/1000 | 10D/20D |
| GYFTA-14~18 | 14~18 | 3 | 3 | 11.0 | 100 | 600/1500 | 300/1000 | 10D/20D |
| GYFTA -20~24 | 20~24 | 4 | 2 | 11.0 | 100 | 600/1500 | 300/1000 | 10D/20D |
| GYFTA-26~30 | 26~30 | 5 | 1 | 11.0 | 100 | 600/1500 | 300/1000 | 10D/20D |
| GYFTA-32~36 | 32~36 | 6 | 0 | 11.0 | 100 | 600/1500 | 300/1000 | 10D/20D |
Note:
1. Only a part of GYFTA fiber cable are listed in the table. More can be produce as required .
2. Cables can be supplied with a range of single mode or multimode fibers.
3. Specially designed Cable structure is available on request.
Duct Fiber Cable Solution:
